HMT VersaDrive Oversized Galv ImpactaTap M24.4 x 3.0mm
VersaDrive? ImpactaTaps for Galvanised Bolts have an oversized thread to compensate for the increased thickness of coating found on galvanised steel fabrications or galvanised fixings. VersaDrive ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.
With a specially designed twin-lead, cutting geometry – the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel.
VersaDrive ImpactaTaps have a patented non-slip, Hex shank suitable for use in any standard 1/2? drill chuck for cordless or pistol drills (up to M10) or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills. They can even be used by hand in a socket wrench.
Galv Taps have an oversized thread to compensate for the increased thickness of coating found on galvanized steel fabrications or galvanised fixing
Chipbreaker action for Automatic chip clearance when Impact Tapping
Unique Dual-Point Starting Angle for easy alignment and fast cut; Ground Flutes create the perfect tapped hole
Safer tapping with minimal kickback
Specially hardened for impact wrench use
High grade tool steel for high accuracy & long life
Goldmax low friction titanium coating to stop burn out
High strength, non slip shank design
Tapping Hole Size requred: 21.0mm; For fastest performance use on impact wrenches & impact drivers
Check the minimum torque requirement
Tapping Stainless Steel requires higher impact torque
Use appropriate lubrication and correct RPM to achieve long tool life